C5P Windows10 x64 OpenCL driver install

Because the win10 system requires the signature of the inf file, sometimes, the driver of the PCIE (without signature) fails to be installed after running aocl install.

工具/原料

As a solution, it needs to disable the driver signature, and then manually install the pcie driver. The steps are as following:

A.Disable the driver signature in the Win10 system

1
1.Click Home，enter “All setting“.
2
2. Access “Update & Security”.
3
3.Find Recovery. Click “Restart now” below “Advanced start-up” ，restart the PC.
4
4.After restarting, choose “Troubleshoot”.
5
5.Choose “Advanced options”.
6
6.Choose "Start-up Settings".
7
7.Click “Restart”.
8
8.Enter "F7" to disable driver signature.

B.Install the PCI driver manually

1
1. After disable driver signature enforcement and restarting the system. Open the Device Manager, You can see a PCI Device with a yellow exclamation mark.
Right Click --> Update Drivers - PCI Device --> Browse my computer for driver software
2
2.Choose “Let me pick from a list of available drivers on my computer”，Click “Next”.
3
3.Continue choose “Next”.
4
4.Choose “Have Disk ...”
5
5.Click Browse，locate BSP to c5p/windows64/driver/acl_boards.inf，Click “OK”.
6
6.Select “Intel(R) FPGA Accelerator”, Click "Next" to continue the installation.
7
7.Select “Install this driver software anyway” in the pop-up “Windows Security” window.
8.Installation complete.
8
8.Installation complete.
9
9.In the device manager, the Jungo Windriver and the C5P PCIE driver are both installed successfully.